Safeguard Audit Service Manual (G06.29+, H06.08+, J06.03+)

Specifying Auditing
Safeguard Audit Service Manual — 520480-031
2 - 5
Auditing Attempts to Access Objects
•
AUDIT-AUTHENTICATE-FAIL
Auditing Attempts to Access Objects
To specify auditing for attempts to access a particular object, use the AUDIT-ACCESS
attributes in the authorization record for the object. The Safeguard subsystem records
the specified access attempts in the current audit file.
specifies the conditions under which successful attempts to access the object are
recorded in the current audit file.
specifies the conditions under which unsuccessful attempts to access the object are
recorded in the current audit file.
The audit-spec variable for AUDIT-ACCESS-PASS and AUDIT-ACCESS-FAIL can
be any one of these four values:
ALL
All attempts to access the object are recorded in the current audit file.
LOCAL
Only local attempts to access this object are recorded in the current audit file.
REMOTE
Only remote attempts to access this object are recorded in the current audit file.
(A remote attempt is one made by a process st
arted by a network user logged on
to a remote system. The process itself might be running on the network user's
system or on this system.)
NONE
No attempts to access this object are recorded in the current audit file. NONE is the
default value for both AUDIT-ACCESS-PASS and AUDIT-ACCESS-FAIL.
Note. This information is supported only on systems running J06.03 and later J-series RVUs,
H06.14 and later H-series RVUs, and G06.32 and later G-series RVUs.
AUDIT-ACCESS-PASS audit-spec
AUDIT-ACCESS-FAIL audit-spec