Safeguard Management Programming Manual (G06.24+, H06.03+)

ManualsBrandsHP ManualsServerHP NonStop G-Series

331

332

333

334

335

336

337

338

339

340

Safeguard Management Programming Manual—422086-012

A-1

A Error Numbers and Error Lists

This appendix lists the Safeguard error numbers and describes the corresponding error

lists. Symbolic names for errors begin with ZSFG-ERR-.

The Safeguard software returns an error list in the response buffer when it detects an

error in the command syntax or command execution. Each error list begins with ZSPI-

TKN-ERRLIST and ends with ZSPI-TKN-ENDLIST.

The Safeguard software also sets the return token ZSPI-TKN-RETCODE to the error

number to identify the error list. If the command completes without an error, Safeguard

sets ZSPI-TKN-RETCODE to ZSPI-ERR-OK (0).

The empty response is the only case when the Safeguard software sets ZSPI-TKN-

RETCODE to a value other than 0 but does not return an error list in the response

buffer. The empty response indicates that the Safeguard software received a command

message with the context token ZSPI-TKN-CONTEXT, but all of the specified objects

had been processed.

For a description of error lists, including how they are retrieved from the response

buffer, see the SPI Programming Manual.

Error-List Descriptions

The Safeguard error lists are described on the following pages. The Safeguard

software returns the following Safeguard (ZSFG-) errors:

Note. In this appendix, all tokens and their values are represented in DDL with hyphens (-)

used as separators. For a quick explanation of DDL, see the SPI Programming Manual. For

detailed information about DDL, see the Data Definition Language (DDL) Reference Manual.

1 ZSFG-ERR-SMALLUSERIDFILE

2 ZSFG-ERR-INTERNAL

3 ZSFG-ERR-SUBJGROUPNUM

4 ZSFG-ERR-SUBJGROUPNAME

5 ZSFG-ERR-SQLOBJECT

6 ZSFG-ERR-LICENSENONOBJ

7 ZSFG-ERR-PROGIDNONOBJ

8 ZSFG-ERR-MAX-ACL-EXCEEDED

9 ZSFG-ERR-SYS-NOT-FOUND

Supported only on systems running G06.27 and later G-series RVUs and H06.03 and later

H-series RVUs.

Supported only on systems running G06.27 and later G-series RVUs and H06.07 and later

H-series RVUs.

Supported only on systems running G06.29 and later G-series RVUs and H06.08 and later

H-series RVUs.

Supported only on systems running H06.08 and later H-series RVUs.

Supported only on systems running H06.09 and later H-series RVUs.