Safeguard Management Programming Manual (G06.24+, H06.03+)

Error Numbers and Error Lists
Safeguard Management Programming Manual—422086-012
A-59
ZSFG-ERR-PATOBJECTFCB-DIR-FULL
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list.
Probable Cause
Safeguard cannot open more than 1000 SAFE.GUARD files. Any attempt to issue
commands like ADD or INFO that makes Safeguard to open more than 1000
SAFE.GUARD files residing on different disks (including virtual disks), returns this
error.
Recommended Action
None
ZSFG-ERR-PATOBJECTFCB-DIR-FULL
An attempt was made to issue a pattern configuration command that involves more
than 1000 disk.
Tokens
ZSPI-TKN-ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the Safeguard subsystem ID and the error number
ZSFG-ERR-PATOBJECTFCB-DIR-FULL. This token is always present in the error
list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list.
Probable Cause
Safeguard cannot open more than 1000 SAFE.PATGUARD files. Any attempt to issue
commands like ADD or INFO that makes Safeguard to open more than 1000
SAFE.PATGUARD files residing on different disks (including virtual disks), returns this
error.
Note. The error token ZSFG-ERR-OBJECTFCB-DIR-FULL is supported only on systems
running G06.29 and later G-series RVUs and H06.08 and later H-series RVUs.
ZSPI-TKN-ERRLIST token type ZSPI-TYP-LIST
ZSPI-TKN-ERROR token type ZSPI-TYP-ERROR
ZCOM-TKN-OBJNAME token type ZSPI-TYPE-STRING
ZSPI-TKN-ENDLIST token type ZSPI-TYP-SSCTL