Safeguard Management Programming Manual (G06.29+, H06.08+, J06.03+)

Error Numbers and Error Lists
Safeguard Management Programming Manual—422086-028
A-72
ZSFG-ERR-PSWD-MIN-QUAL
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list.
Probable Cause
An attempt was made to change or set the attribute PASSWORD-SPACE-ALLOWED,
when PASSWORD-ALGORITHM is DES PASSWORD-ENCRYPT is OFF, or
PASSWORD-COMPATIBILITY-MODE is ON.
Recommended Action
The PASSWORD-ALGORITHM should be set to HMAC256, PASSWORD-ENCRYPT
should be set to ON, and PASSWORD-COMPATIBILITY-MODE should be set to OFF.
ZSFG-ERR-PSWD-MIN-QUAL
An attempt was made to change or set the attribute
PASSWORD-MIN-QUALITY-REQUIRED to a value greater than the number of
individual password quality attributes set to ON, or an attempt was made to alter any
password quality attribute to OFF, such that the number of individual password quality
attributes set to ON is greater than the value of the attribute PASSWORD-MIN-
QUALITY-REQUIRED.
Tokens
ZSPI-TKN-ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the Safeguard subsystem ID and the error number
ZSFG-ERR-PSWD-MIN-QUAL. This token is always present in the error list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list.
Note. This error token is supported only on systems running G06.31 and later G-series RVUs
and H06.09 and later H-series RVUs.
ZSPI-TKN-ERRLIST token type ZSPI-TYP-LIST
ZSPI-TKN-ERROR token type ZSPI-TYP-ERROR
ZCOM-TKN-OBJNAME token type ZSPI-TYP-STRING
ZSPI-TKN-ENDLIST token type ZSPI-TYP-SSCTL