Safeguard Reference Manual (G06.24+, H06.03+ )

User Alias Security Commands
Safeguard Reference Manual—520618-013
6-14
ALTER ALIAS Command
year
is a 4-digit integer.
hour
is an integer from 0 through 23.
min
is an integer from 0 through 59.
Setting the PASSWORD-MUST-CHANGE attribute after setting the
PASSWORD-EXPIRES attribute causes the PASSWORD-EXPIRES date
calculated as a result of setting PASSWORD-MUST-CHANGE to override the
explicit setting of the PASSWORD-EXPIRES attribute.
AUDIT-AUTHENTICATE-PASS [audit-spec]
changes the audit-spec for successful user authentication (logon) attempts
with this alias. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of audit-spec, see the SET ALIAS Command on
page 6-37. Omitting audit-spec specifies NONE.
AUDIT-AUTHENTICATE-FAIL [audit-spec]
changes the audit-spec for unsuccessful user authentication (logon)
attempts with this alias. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of audit-spec, see the SET ALIAS Command on
page 6-37. Omitting audit-spec specifies NONE.
AUDIT-MANAGE-PASS [audit-spec]
changes the audit-spec for successful attempts to manage the alias
authentication record. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of audit-spec, see the SET ALIAS Command on
page 6-37. Omitting audit-spec specifies NONE.
Note. In prior product versions of the Safeguard software, the AUDIT-
AUTHENTICATE user attributes were called AUDIT-ACCESS. The user attribute name
AUDIT-ACCESS is still supported, but HP discourages its use.