Safeguard Reference Manual (G06.24+, H06.03+ )

Disk-File Security Commands
Safeguard Reference Manual—520618-013
8-68
SHOW DISKFILE Command
AUDIT-ACCESS-FAIL [audit-spec]
changes the audit-spec for unsuccessful attempts to access the diskfile
pattern. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of audit-spec, see the SET DISKFILE Command on
page 8-55. Omitting audit-spec specifies NONE.
AUDIT-MANAGE-PASS [audit-spec]
changes the audit-spec for successful attempts to manage (change or read)
a diskfile-pattern authorization record. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of audit-spec, see the SET DISKFILE Command on
page 8-55. Omitting audit-spec specifies NONE.
AUDIT-MANAGE-FAIL [audit-spec]
changes the audit-spec for unsuccessful attempts to manage (change or
read) a diskfile-pattern authorization record. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of audit-spec, see the SET DISKFILE Command on
page 8-55. Omitting audit-spec specifies NONE.
WARNING-MODE { ON | OFF }
defines whether warning mode is enabled for the specified diskfile pattern. The
value is required. For more information on warning mode, see the Safeguard
Administrator's Manual.
ON enables warning mode for the specified diskfile pattern. The initial value is
OFF, which disables warning mode for the specified diskfile pattern.
Example
1. To set the default owner to be PROD.DBA:
SET DISKFILE-PATTERN OWNER PROD.DBA
SHOW DISKFILE Command
SHOW DISKFILE displays the current default values for the disk-file attribute.
When you add a disk file authorization record, the current default disk file attributes are
used for any attributes you do not specify in the ADD DISKFILE command. (To set the
default disk file attributes to specific values, use the SET DISKFILE command.)
SHOW [ / OUT listfile / ] DISKFILE