Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-9
ADD DEVICE and SUBDEVICE Commands
AUDIT-ACCESS-FAIL [audit-spec]
changes the audit-spec for unsuccessful attempts to access the device or
subdevice. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of the audit-specs, see the SET DEVICE and
SUBDEVICE Commands on page 10-25. Omitting audit-spec specifies
NONE.
AUDIT-MANAGE-PASS [audit-spec]
changes the audit-spec for successful attempts to manage this device or
subdevice authorization record. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of the audit-specs, see the SET DEVICE and
SUBDEVICE Commands on page 10-25. Omitting audit-spec specifies
NONE.
AUDIT-MANAGE-FAIL [audit-spec]
changes the audit-spec for unsuccessful attempts to manage this device or
subdevice authorization record. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of the audit-specs, see the SET DEVICE and
SUBDEVICE Commands on page 10-25. Omitting audit-spec specifies
NONE.
WARNING-MODE { ON | OFF }
defines whether warning mode is enabled for the specified device or
subdevice. The value is required. For more information on warning mode, see
the Safeguard Administrator's Manual.
ON enables warning mode for the specified device or subdevice. The initial
value is OFF, which disables warning mode for the specified device or
subdevice.
Consideration
Any attribute specifications in an ADD DEVICE or SUBDEVICE command affect only
the authorization record being created and do not change the current default values.
This condition is also true for a LIKE clause in an ADD DEVICE or SUBDEVICE
command.