Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands

Safeguard Reference Manual—520618-013

10-20

INFO DEVICE and SUBDEVICE Commands

subdevice-list

specifies one or more subdevices for which INFO reports are to be produced.

subdevice-list can be either:

subdevice-name

( subdevice-name [ , subdevice-name ... ] )

subdevice-name

can be any subdevice name. The name can contain wild-card characters.

DETAIL

adds the audit-specs defined for the device or subdevice to the INFO report.

For a full description of the four audit-specs, see the SET DEVICE and

SUBDEVICE Commands on page 10-25.

INFO DEVICE and SUBDEVICE Brief Report

The brief INFO DEVICE and SUBDEVICE report gives information about devices and

subdevices. Figure 10-1 shows the format of the brief INFO DEVICE report. The INFO

SUBDEVICE format is identical except that the report gives the name of the subdevice

rather than a device.

Figure 10-1 contains these device attribute values and status fields:

$device

is the name of the device or subdevice whose existing attribute values are being

displayed.

date, time

is the date and time of the last change made to this authorization record. date and

time are in local civil time.

owner-id

is the user ID of the user who owns this authorization record.

Figure 10-1. INFO DEVICE Brief Report Format

LAST-MODIFIED OWNER STATUS WARNING-MODE

$device

date, time owner-id status {ON|OFF}

user-spec [DENY] authority-list

[ NO ACCESS CONTROL LIST DEFINED! ]