Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-31
SHOW DEVICE and SUBDEVICE Commands
•
The owner of the authorization record for the device is the PRS manager.
•
The Safeguard software audits successful access of the device and successful
local management of the device’s authorization record.
•
All members of groups 33, 86, and 255 can read and write to the device except
PRS.HARRY, who is specifically denied access.
•
All members of group 86 and 255 have OWNER authority except PRS.HARRY,
who is specifically denied all authorities.
SHOW DEVICE and SUBDEVICE Commands
SHOW DEVICE or SUBDEVICE displays the current default values for the attributes.
OUT listfile
directs the SHOW PROCESS report to listfile. After you execute the SHOW
command, SAFECOM redirects its output to the current OUT file.
For listfile, specify any file name. SAFECOM opens listfile and appends
the SHOW DEVICE or SUBDEVICE report to the file. If listfile does not exist,
SAFECOM creates an EDIT file and then writes the SHOW DEVICE or
SUBDEVICE report to that file.
SHOW DEVICE and SUBDEVICE Report Format
The SHOW DEVICE command displays the device attributes and their current default
values in the format shown in Figure 10-3. The SHOW SUBDEVICE command output
is identical, except for the word SUBDEVICE in place of the word DEVICE.
The SHOW DEVICE report displays these attribute values:
SHOW [ / OUT listfile / ] { DEVICE | SUBDEVICE }
Figure 10-3. SHOW DEVICE Report Format
TYPE OWNER WARNING-MODE
DEVICE gn,un {ON|OFF}
AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec
AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec
user-spec [DENY] authority-list
user-spec [DENY] authority-list
. . .
. . .
[ NO ACCESS CONTROL LIST DEFINED! ]