Safeguard Reference Manual (G06.24+, H06.03+ )

Process and Subprocess Security Commands
Safeguard Reference Manual—520618-013
11-23
INFO PROCESS and SUBPROCESS Commands
INFO PROCESS and SUBPROCESS Brief Report
The brief INFO PROCESS or SUBPROCESS report gives you information about the
process name or names you specify. Figure 11-1 shows the format of the brief INFO
PROCESS report. The format of the INFO SUBPROCESS report is similar, except that
the name of the subprocess replaces the name of the process.
Figure 11-1 contains the following process attribute values and status fields:
$process
is the process name whose current attribute values are being displayed.
LAST MODIFIED date, time
indicates the date and time of the last change made to this process name
authorization record. The times indicated by date and time are local civil time.
OWNER owner-id
is the user ID of the user who owns this process name.
STATUS status
is the current status of this process name. status is either FROZEN or THAWED.
WARNING-MODE
{ON|OFF}
is the current warning-mode state of this process or subprocess. ON indicates that
the protection record is in warning mode. The initial value is OFF, which indicates
that warning mode is disabled for this process or subprocess.
user-spec [DENY] authority-list
is an entry in the ACL defined for this process name. user-spec identifies a
single user or user group. authority-list is a list of single-character codes that
represent the access authorities granted to the user or user group identified by
user-spec. DENY indicates that the access authorities specified in the
authority-list are specifically denied to the user or user group identified by
user-spec.
Figure 11-1. INFO PROCESS Brief Report Format
LAST-MODIFIED OWNER STATUS WARNING-MODE
$process
date, time owner-id status {ON|OFF}
user-spec [DENY] authority-list
user-spec [DENY] authority-list
.
.
.
[ NO ACCESS CONTROL LIST DEFINED! ]