Safeguard Reference Manual (G06.24+, H06.03+ )

Process and Subprocess Security Commands
Safeguard Reference Manual—520618-013
11-33
SET PROCESS and SUBPROCESS Commands
NONE
No successful management attempts are audited.
Omitting audit-spec specifies NONE.
AUDIT-MANAGE-FAIL [audit-spec]
establishes an audit-spec for unsuccessful attempts to change or read an
authorization record. This audit-spec specifies the conditions under which
an audit record is written to the audit file when an attempt to manage an
authorization record fails.
The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
ALL
All unsuccessful management attempts are audited.
LOCAL
Only unsuccessful management attempts made by local users are audited.
REMOTE
Only unsuccessful management attempts made by remote users are
audited.
NONE
No unsuccessful management attempts are audited.
Omitting audit-spec specifies NONE.
WARNING-MODE { ON | OFF }
defines whether warning mode is enabled for the specified process or
subprocess. The value is required. For more information on warning mode, see
the Safeguard Administrator's Manual.
ON enables warning mode for the specified process or subprocess. The initial
value is OFF, which disables warning mode for the specified process or
subprocess.
Example
User PRS.HARRY (with user ID 86,2) enters the following SET PROCESS commands
to specify default ACL entries and audit specifications before creating a process name
authorization record with ADD PROCESS:
=ASSUME PROCESS
=SET OWNER 86,2