Safeguard Reference Manual (G06.24+, H06.03+ )

Process and Subprocess Security Commands
Safeguard Reference Manual—520618-013
11-36
THAW PROCESS and SUBPROCESS Commands
user-spec [DENY] auth-list
is a current default ACL entry for processes. For a full description, see INFO
PROCESS and SUBPROCESS Brief Report on page 11-23.
[ NO ACCESS CONTROL LIST DEFINED! ]
indicates no ACL entries have been defined in the current default attribute values.
Use SET PROCESS...ACCESS or SET SUBPROCESS...ACCESS to define
default ACL entries. You can use ADD PROCESS...ACCESS or ADD
SUBPROCESS...ACCESS to define ACL entries when you create an authorization
record.
Example
The SHOW PROCESS report displays the current default process attribute values
during a SAFECOM session. For example:
=SHOW PROCESS
This display shows that no ACL is defined, but each of the four auditing specifications
is set to ALL. The owner of the potential process name authorization record is
PRS.HARRY, who has user ID 86,2.
THAW PROCESS and SUBPROCESS Commands
THAW PROCESS or SUBPROCESS restores the ACL for a frozen process name.
After a frozen process name is thawed, users who were granted access authority by
the ACL for the process name can once again access the process name.
An owner of the authorization record, the primary owner’s group manager, and the
super ID can thaw a frozen process or subprocess name.
THAW PROCESS or SUBPROCESS has no effect on a process name that is not
frozen.
Caution. If you do not specify an ACL for a process, only the local super ID can access the
process or subprocess name.
TYPE OWNER WARNING-MODE
PROCESS 86,2 OFF
AUDIT-ACCESS-PASS = ALL AUDIT-MANAGE-PASS = ALL
AUDIT-ACCESS-FAIL = ALL AUDIT-MANAGE-FAIL = ALL
NO ACCESS CONTROL LIST DEFINED!
THAW PROCESS process name-list [ [ , ] WHERE option-list ]
THAW SUBPROCESS subprocess name-list [ [ , ] WHERE WARNING-
MODE ]