Safeguard Reference Manual (G06.24+, H06.03+ )

Security Group Commands
Safeguard Reference Manual—520618-013
13-15
INFO SECURITY-GROUP Command
INFO SECURITY-GROUP Command
INFO SECURITY-GROUP displays the attribute values currently stored in a security
group authorization record and produces two types of reports: brief and detailed. The
format of each report is illustrated after these syntax description.
Any user can produce an INFO report on any security group.
OUT
directs the INFO SECURITY-GROUP report to listfile. After it executes the
INFO command, SAFECOM redirects its output to the current OUT file.
listfile
For listfile, specify any file name. SAFECOM opens listfile and appends
the INFO report to the file. If listfile does not exist, SAFECOM creates it as an
EDIT-format file.
sec-group-list
specifies the security group for which INFO reports are to be produced.
sec-group-list can be either:
sec-group-spec
( sec-group-spec [ , sec-group-spec ] ... )
sec-group-spec
can be either:
SECURITY-ADMINISTRATOR
SYSTEM-OPERATOR
DETAIL
adds the audit-specs defined for the security group to the INFO report. For a full
description of the four audit-specs, see the SET SECURITY-GROUP Command
on page 13-20.
INFO SECURITY-GROUP Brief Report
The brief INFO SECURITY-GROUP report displays the attribute values currently
stored for this security group. Figure 13-1 on page 13-16 shows the format of the brief
INFO SECURITY-GROUP report.
INFO [ / OUT listfile / ] SECURITY-GROUP [ , ] sec-group-list
[ [ , ] DETAIL ]