Safeguard Reference Manual (G06.24+, H06.03+ )

SAFECOM Error and Warning Messages
Safeguard Reference Manual—520618-013
A-2
2. Provide the Safeguard configuration in effect when the error occurred. Also include
information on a user who is experiencing the problem. To obtain this information,
execute the following SAFECOM commands:
> SAFECOM INFO SAFEGUARD, DETAIL
> SAFECOM INFO USER user-ID, DETAIL
3. If the problem is reproducible, list in detail the steps required to reproduce the
problem. If the problem is not reproducible, provide the EMSLOG that was active
when the problem occurred.
4. Provide a synopsis of the series of SAFECOM commands that caused the
problem.
5. If the problem started occurring only recently, list any recent changes made to the
system.
The SAFECOM error and warning messages follow in alphabetical order.
Cause. An access authority (READ, WRITE, EXECUTE, PURGE, or CREATE)
specified in an access-spec is not valid for the type of object being added or altered.
Effect. The command is not executed.
Recovery. Reenter the command with a valid access authority for the specified object
type.
Cause. An attribute was specified that is not compatible with the type of object named
in the command.
Effect. The command is not executed.
Recovery. Reenter the command using only attributes compatible with the specified
object type.
Cause. An attribute was specified that is not compatible with the subject type named
in the command.
Effect. The command is not executed.
Recovery. Reenter the command using only attributes compatible with the subject
type.
ACL AUTHORITY NOT VALID FOR OBJECT TYPE; COMMAND NOT EXECUTED.
ATTRIBUTE IS NOT COMPATIBLE WITH OBJECT TYPE; COMMAND NOT EXECUTED.
ATTRIBUTE IS NOT COMPATIBLE WITH SUBJECT TYPE; COMMAND NOT EXECUTED.