Safeguard Reference Manual (G06.29+, H06.08+, J06.03+)

User Alias Security Commands
Safeguard Reference Manual — 520618-030
6 - 55
SHOW ALIAS Command
CI-SWAP = { $vol[.subvol.filename] | * NONE * }
either gives the swap volume or file used with the command interpreter or indicates
no swap volume or file is specified.
CI-CPU = { num | ANY }
either gives the number of the CPU in which the command interpreter runs or
indicates any CPU will be used.
CI-PRI = { num | * NONE * }
either gives the priority at which the command interpreter runs or indicates that no
priority is assigned in the user record.
CI-PARAM-TEXT = [ text ]
either gives the startup parameter text supplied to the command interpreter or
indicates no parameter is supplied.
INITIAL-PROGTYPE = prog-type
gives the initial program type: PROGRAM, WINDOW, or SERVICE.
INITIAL-PROGRAM = [ prog-path ]
either gives the initial program pathname or appears blank to indicate that no
pathname is defined.
INITIAL-DIRECTORY = [ dir-path ]
either gives the initial directory pathname or appears blank to indicate that no
pathname is defined.
SUBJECT DEFAULT-PROTECTION SECTION
either gives the default protection to be assigned to disk files created by the alias
or indicates that no default protection is defined.
SUBJECT OWNER-LIST SECTION
lists the secondary owners of the alias authentication record.