Safeguard Reference Manual (G06.29+, H06.08+, J06.03+)
Table Of Contents
- Safeguard Reference Manual
- Legal Notices
- Contents
- What is New in this Manual
- Manual Information
- New and Changed Information
- Changes to the 520618-030 manual
- Changes to the 520618-029 manual
- Changes to the 520618-028 manual
- Changes to the 520618-027 manual
- Changes to the 520618-026 manual
- Changes to the 520618-025 manual
- Changes to the H06.22/J06.11 manual
- Changes to the H06.21/J06.10 Manual
- Changes to the H06.20/J06.09 Manual
- Changes to the 520618-020 Manual
- Changes to the H06.19/J06.08 Manual
- About This Manual
- 1 Introduction
- 2 Common SAFECOM Language Elements
- 3 The Command to Run SAFECOM
- 4 SAFECOM Session-Control Commands
- 5 User Security Commands
- 6 User Alias Security Commands
- 7 Group Commands
- 8 Disk-File Security Commands
- Disk-File Ownership
- Disk-File Access Authorities
- Disk-File Access Authorization
- Disk-File Security Command Summary
- Syntax of Disk-File Security Commands
- ADD DISKFILE Command
- ADD DISKFILE-PATTERN Command
- ALTER DISKFILE Command
- ALTER DISKFILE-PATTERN Command
- DELETE DISKFILE Command
- DELETE DISKFILE-PATTERN Command
- FREEZE DISKFILE Command
- FREEZE DISKFILE-PATTERN Command
- INFO DISKFILE Command
- INFO DISKFILE-PATTERN Command
- RESET DISKFILE Command
- RESET DISKFILE-PATTERN Command
- SET DISKFILE Command
- SET DISKFILE-PATTERN Command
- SHOW DISKFILE Command
- SHOW DISKFILE-PATTERN Command
- THAW DISKFILE Command
- THAW DISKFILE-PATTERN Command
- SAFECOM Saved Diskfile Pattern Commands
- ADD SAVED-DISKFILE-PATTERN Command
- ALTER SAVED-DISKFILE-PATTERN Command
- DELETE SAVED-DISKFILE-PATTERN Command
- FREEZE SAVED-DISKFILE-PATTERN Command
- INFO SAVED-DISKFILE-PATTERN Command
- RESET SAVED-DISKFILE-PATTERN Command
- SET SAVED-DISKFILE-PATTERN Command
- SHOW SAVED-DISKFILE-PATTERN Command
- THAW SAVED-DISKFILE-PATTERN Command
- 9 Disk Volume and Subvolume Security Commands
- Volume Authorization Record Ownership
- Subvolume Authorization Record Ownership
- Volume and Subvolume Access Authorities
- Volume and Subvolume Access Authorization
- Volume and Subvolume Security Command Summary
- Syntax of Disk Volume and Subvolume Security Commands
- ADD VOLUME and SUBVOLUME Commands
- ALTER VOLUME and SUBVOLUME Commands
- DELETE VOLUME and SUBVOLUME Commands
- FREEZE VOLUME and SUBVOLUME Commands
- INFO VOLUME and SUBVOLUME Commands
- RESET VOLUME and SUBVOLUME Commands
- SET VOLUME and SUBVOLUME Commands
- SHOW VOLUME and SUBVOLUME Commands
- THAW VOLUME and SUBVOLUME Commands
- 10 Device and Subdevice Security Commands
- Device and Subdevice Authorization Record Ownership
- Device and Subdevice Access Authorities
- Device and Subdevice Access Authorization
- Device and Subdevice Security Command Summary
- Syntax of Device and Subdevice Security Commands
- ADD DEVICE and SUBDEVICE Commands
- ALTER DEVICE and SUBDEVICE Commands
- DELETE DEVICE and SUBDEVICE Commands
- FREEZE DEVICE and SUBDEVICE Commands
- INFO DEVICE and SUBDEVICE Commands
- RESET DEVICE and SUBDEVICE Commands
- SET DEVICE and SUBDEVICE Commands
- SHOW DEVICE and SUBDEVICE Commands
- THAW DEVICE and SUBDEVICE Commands
- 11 Process and Subprocess Security Commands
- Process and Subprocess Security
- Process and Subprocess Access Authorities
- Special NAMED and UNNAMED Process Protection Records
- Process and Subprocess Security Command Summary
- Syntax of the Process and Subprocess Security Commands
- ADD PROCESS and SUBPROCESS Commands
- ALTER PROCESS and SUBPROCESS Commands
- DELETE PROCESS and SUBPROCESS Commands
- FREEZE PROCESS and SUBPROCESS Commands
- INFO PROCESS and SUBPROCESS Commands
- RESET PROCESS and SUBPROCESS Commands
- SET PROCESS and SUBPROCESS Commands
- SHOW PROCESS and SUBPROCESS Commands
- THAW PROCESS and SUBPROCESS Commands
- 12 OBJECTTYPE Security Commands
- 13 Security Group Commands
- 14 Terminal Security Commands
- 15 Event-Exit-Process Commands
- 16 Safeguard Subsystem Commands
- 17 Running Other Programs From SAFECOM
- A SAFECOM Error and Warning Messages
- B Disk-File Access Rules
- Index
What is New in this Manual
Safeguard Reference Manual — 520618-030
xxiv
Changes to the H06.21/J06.10 Manual
°
INITIAL-PROGRAM [prog-path] on page 5-18.
°
INITIAL-PROGTYPE [prog-type] on page 5-18.
•
Added information on the SECURITY-PRV-ADMINISTRATOR security group in
Security Group Commands.
•
Corrected the order of the Subject data fields in Table 15-3, Subject_Data, on
page 15-17.
•
Added a note specifying that the following password attributes support the DES
and HMAC256 password algorithms:
°
PASSWORD-UPPERCASE-REQUIRED on page 16-30.
°
PASSWORD-LOWERCASE-REQUIRED on page 16-30.
°
PASSWORD-NUMERIC-REQUIRED on page 16-31.
°
PASSWORD-SPECIALCHAR-REQUIRED on page 16-31.
•
Added the following attributes and their descriptions to the ALTER SAFEGUARD
Command:
°
PASSWORD-MIN-UPPERCASE-REQ on pages 16-8 and 16-33.
°
PASSWORD-MIN-LOWERCASE-REQ on pages 16-8 and 16-34.
°
PASSWORD-MIN-NUMERIC-REQ on pages 16-8 and 16-34.
°
PASSWORD-MIN-SPECIALCHAR-REQ on pages 16-8 and 16-35.
°
PASSWORD-APLHA-REQUIRED on pages 16-8 and 16-35.
°
PASSWORD-MIN-APLHA-REQ on pages 16-8 and 16-36.
•
Updated the description of the PASSWORD-MIN-QUALITY-REQUIRED attribute
on page 16-32.
•
Added new error messages on pages A-5 and A-6, and a warning message on
page
A-36.
Changes to the H06.21/J06.10 Manual
•
Added information on Safeguard Helper Process (SHP) on page 1-11.
•
Added SYNC VOLUME to Table 1-1, Who Can Use SAFECOM Commands, on
page
1-13.
•
Updated the list of owners who can control the PROGID attribute on page 8-2.
•
Added the SAFECOM Saved Diskfile Pattern Commands section, containing the
following commands, on page
8-78:
°
ADD SAVED-DISKFILE-PATTERN Command on page 8-78.
°
ALTER SAVED-DISKFILE-PATTERN Command on page 8-83.