Safeguard Reference Manual (G06.29+, H06.08+, J06.03+)

Device and Subdevice Security Commands
Safeguard Reference Manual — 520618-030
10 - 32
SHOW DEVICE and SUBDEVICE Commands
WARNING-MODE { ON | OFF }
defines whether warning mode is enabled for the specified device or
subdevice. The value is required. For more information on warning mode, see
the Safeguard Administrator's Manual.
ON enables warning mode for the specified device or subdevice. The initial
value is OFF
, which disables warning mode for the specified device or
subdevice.
Example
These commands define default values for a new printer:
=ASSUME DEVICE
=SET OWNER prs.manager
=SET AUDIT-ACCESS-PASS all , AUDIT-MANAGE-PASS local
=SET ACCESS 33,* (r,w) ; 86,* *; prs.harry DENY *; 255,* *
These default device attribute values are defined here:
•
The owner of the authorization record for the device is the PRS manager.
•
The Safeguard software audits successful access of the device and successful
local management of the device’s authorization record.
•
All members of groups 33, 86, and 255 can read and write to the device except
PRS.HARRY, who is specifically denied access.
•
All members of group 86 and 255 have OWNER authority except PRS.HARRY,
who is specifically denied all authorities.
SHOW DEVICE and SUBDEVICE Commands
SHOW DEVICE or SUBDEVICE displays the current default values for the attributes.
OUT listfile
directs the SHOW PROCESS report to listfile. Af
ter you execute the SHOW
command, SAFECOM redirects its output to the current OUT file.
For listfile, specify any file name. SAFECOM opens listfile and appends
the SHOW DEVICE or SUBDEVICE report to the file. If listfile does not exist,
SAFECOM creates an EDIT file and then writes the SHOW DEVICE or
SUBDEVICE report to that file.
SHOW [ / OUT listfile / ] { DEVICE | SUBDEVICE }