Safeguard Reference Manual (G06.29+, H06.08+, J06.03+)

Safeguard Subsystem Commands
Safeguard Reference Manual — 520618-030
16 - 32
ALTER SAFEGUARD Command
PASSWORD-SPACES-ALLOWED {ON / OFF}
defines whether a user password will be allowed to have embedded spaces.
The initial value is OFF.
When PASSWORD-ENCRYPT is OFF or PASSWORD-ALGORITHM is DES or
PASSWORD-COMPATIBILITY-MODE is ON, an attempt to alter
PASSWORD-SPACES-ALLOWED to ON shall result in an error. The error
messages displayed are:
PASSWORD-MIN-QUALITY-REQUIRED
specifies the minimum quality criteria that must be met when a password is set
or changed. The valid values of PASSWORD-MIN-QUALITY-REQUIRED
range from 0 to 5. The initial value is 0.
.
The following considerations apply to the PASSWORD-MIN-QUALITY-REQUIRED
attribute:
•
PASSWORD-MIN-QUALITY-REQUIRED can be modified only when PASSWORD-
ENCRYPT is ON.
Note. This attribute is supported only on systems running H06.09 and later H-series
RVUs and G06.31 and later G-series RVUs.
THIS ATTRIBUTE CANNOT BE MODIFIED UNLESS PASSWORD-ALGORITHM = HMAC256,
PASSWORD-ENCRYPT = ON, and PASSWORD-COMPATIBILITY-MODE = OFF; COMMAND NOT
EXECUTED.
ZSFG^ERR^PSWD^SPACE^NEED^CMOFF
Note. When any one of the following password quality attributes is enabled,
PASSWORD-MIN-QUALITY-REQUIRED will be automatically set from 0 to 1:
•
PASSWORD-UPPERCASE-REQUIRED
•
PASSWORD-LOWERCASE-REQUIRED
•
PASSWORD-NUMERIC-REQUIRED
•
PASSWORD-SPECIALCHAR-REQUIRED
•
PASSWORD-ALPHA-REQUIRED
Note. This attribute is supported only on systems running H06.09 and later H-series RVUs
and G06.31 and later G-series RVUs.