Safeguard Reference Manual (G06.29+, H06.08+, J06.03+)
Table Of Contents
- Safeguard Reference Manual
- Legal Notices
- Contents
- What is New in this Manual
- Manual Information
- New and Changed Information
- Changes to the 520618-030 manual
- Changes to the 520618-029 manual
- Changes to the 520618-028 manual
- Changes to the 520618-027 manual
- Changes to the 520618-026 manual
- Changes to the 520618-025 manual
- Changes to the H06.22/J06.11 manual
- Changes to the H06.21/J06.10 Manual
- Changes to the H06.20/J06.09 Manual
- Changes to the 520618-020 Manual
- Changes to the H06.19/J06.08 Manual
- About This Manual
- 1 Introduction
- 2 Common SAFECOM Language Elements
- 3 The Command to Run SAFECOM
- 4 SAFECOM Session-Control Commands
- 5 User Security Commands
- 6 User Alias Security Commands
- 7 Group Commands
- 8 Disk-File Security Commands
- Disk-File Ownership
- Disk-File Access Authorities
- Disk-File Access Authorization
- Disk-File Security Command Summary
- Syntax of Disk-File Security Commands
- ADD DISKFILE Command
- ADD DISKFILE-PATTERN Command
- ALTER DISKFILE Command
- ALTER DISKFILE-PATTERN Command
- DELETE DISKFILE Command
- DELETE DISKFILE-PATTERN Command
- FREEZE DISKFILE Command
- FREEZE DISKFILE-PATTERN Command
- INFO DISKFILE Command
- INFO DISKFILE-PATTERN Command
- RESET DISKFILE Command
- RESET DISKFILE-PATTERN Command
- SET DISKFILE Command
- SET DISKFILE-PATTERN Command
- SHOW DISKFILE Command
- SHOW DISKFILE-PATTERN Command
- THAW DISKFILE Command
- THAW DISKFILE-PATTERN Command
- SAFECOM Saved Diskfile Pattern Commands
- ADD SAVED-DISKFILE-PATTERN Command
- ALTER SAVED-DISKFILE-PATTERN Command
- DELETE SAVED-DISKFILE-PATTERN Command
- FREEZE SAVED-DISKFILE-PATTERN Command
- INFO SAVED-DISKFILE-PATTERN Command
- RESET SAVED-DISKFILE-PATTERN Command
- SET SAVED-DISKFILE-PATTERN Command
- SHOW SAVED-DISKFILE-PATTERN Command
- THAW SAVED-DISKFILE-PATTERN Command
- 9 Disk Volume and Subvolume Security Commands
- Volume Authorization Record Ownership
- Subvolume Authorization Record Ownership
- Volume and Subvolume Access Authorities
- Volume and Subvolume Access Authorization
- Volume and Subvolume Security Command Summary
- Syntax of Disk Volume and Subvolume Security Commands
- ADD VOLUME and SUBVOLUME Commands
- ALTER VOLUME and SUBVOLUME Commands
- DELETE VOLUME and SUBVOLUME Commands
- FREEZE VOLUME and SUBVOLUME Commands
- INFO VOLUME and SUBVOLUME Commands
- RESET VOLUME and SUBVOLUME Commands
- SET VOLUME and SUBVOLUME Commands
- SHOW VOLUME and SUBVOLUME Commands
- THAW VOLUME and SUBVOLUME Commands
- 10 Device and Subdevice Security Commands
- Device and Subdevice Authorization Record Ownership
- Device and Subdevice Access Authorities
- Device and Subdevice Access Authorization
- Device and Subdevice Security Command Summary
- Syntax of Device and Subdevice Security Commands
- ADD DEVICE and SUBDEVICE Commands
- ALTER DEVICE and SUBDEVICE Commands
- DELETE DEVICE and SUBDEVICE Commands
- FREEZE DEVICE and SUBDEVICE Commands
- INFO DEVICE and SUBDEVICE Commands
- RESET DEVICE and SUBDEVICE Commands
- SET DEVICE and SUBDEVICE Commands
- SHOW DEVICE and SUBDEVICE Commands
- THAW DEVICE and SUBDEVICE Commands
- 11 Process and Subprocess Security Commands
- Process and Subprocess Security
- Process and Subprocess Access Authorities
- Special NAMED and UNNAMED Process Protection Records
- Process and Subprocess Security Command Summary
- Syntax of the Process and Subprocess Security Commands
- ADD PROCESS and SUBPROCESS Commands
- ALTER PROCESS and SUBPROCESS Commands
- DELETE PROCESS and SUBPROCESS Commands
- FREEZE PROCESS and SUBPROCESS Commands
- INFO PROCESS and SUBPROCESS Commands
- RESET PROCESS and SUBPROCESS Commands
- SET PROCESS and SUBPROCESS Commands
- SHOW PROCESS and SUBPROCESS Commands
- THAW PROCESS and SUBPROCESS Commands
- 12 OBJECTTYPE Security Commands
- 13 Security Group Commands
- 14 Terminal Security Commands
- 15 Event-Exit-Process Commands
- 16 Safeguard Subsystem Commands
- 17 Running Other Programs From SAFECOM
- A SAFECOM Error and Warning Messages
- B Disk-File Access Rules
- Index
Safeguard Subsystem Commands
Safeguard Reference Manual — 520618-030
16 - 34
ALTER SAFEGUARD Command
PASSWORD-MIN-LOWERCASE-REQ [ n ]
n specifies the minimum number of lowercase characters required in a user
password when it is set or changed.
The valid values of PASSWORD-MIN-LOWERCASE-REQ range from 0 to 8.
The initial value is 0.
The following considerations apply to the PASSWORD-MIN-LOWERCASE-
REQ attribute:
•
The PASSWORD-MIN-LOWERCASE-REQ attribute will take effect only
when the PASSWORD-LOWERCASE-REQUIRED attribute is enabled.
•
When the PASSWORD-LOWERCASE-REQUIRED attribute is changed
from OFF to ON, Safeguard sets the value of the PASSWORD-MIN-
LOWERCASE-REQ attribute to 1.
•
When the PASSWORD-LOWERCASE-REQUIRED attribute is changed
from ON to OFF, Safeguard sets the value of the PASSWORD-MIN-
LOWERCASE-REQ attribute to 0.
•
The sum of the values of the effective password quality attributes
(PASSWORD-MIN-UPPERCASE-REQ, PASSWORD-MIN-LOWERCASE-
REQ, PASSWORD-MIN-NUMERIC-REQ, PASSWORD-MIN-
SPECIALCHAR-REQ or PASSWORD-MIN-ALPHA-REQ) must not be
greater than the value of the PASSWORD-MAXIMUM-LEN attribute.
PASSWORD-MIN-NUMERIC-REQ [ n ]
n specifies the minimum number of numeric characters required in a user
password when it is set or changed.
The valid values of PASSWORD-MIN-NUMERIC-REQ range from 0 to 8. The
initial value
is 0.
The following considerations apply to the PASSWORD-MIN-NUMERIC-REQ
attribute:
•
The PASSWORD-MIN-NUMERIC-REQ attribute will take effect only when
the PASSWORD-NUMERIC-REQUIRED attribute is enabled.
•
When the PASSWORD-NUMERIC-REQUIRED attribute is changed from
OFF to ON, Safeguard sets the value of the PASSWORD-MIN-NUMERIC-
REQ attribute to 1.
Note. The PASSWORD-MIN-LOWERCASE-REQ attribute is supported only on
systems running J06.11 and later J-series RVUs and H06.22 and later H-series RVUs.
Note. The PASSWORD-MIN-NUMERIC-REQ attribute is supported only on systems
run
ning J06.11 and later J-series RVUs and H06.22 and later H-series RVUs.