Safeguard Reference Manual (G06.29+, H06.08+, J06.03+)

SAFECOM Error and Warning Messages
Safeguard Reference Manual — 520618-030
A - 9
Effect. An authorization record for the object is not added to the object database.
Recovery. Write down the SMP error number and contact your HP representative.
(Your HP representative will need the SMP error number to correct the problem.)
Cause. SAFECOM encountered the indicated file-system error while attempting to
open the SMP.
Effect. The command is not executed.
Recovery. Report the problem to your system manager. Your system manager should
ensure that the Safeguard software has been installed properly. If your system
manager cannot solve the problem, report the error to your HP representative. (The
System Messages Manual describes file-system errors.)
Cause. The Safeguard management process ($ZSMP) is not running or has not been
started on the system.
Effect. The command is not executed.
Recovery. Report the problem to your system manager. Your system manager should
ensure that the Safeguard software has been installed properly.
Cause. You lack the authority required to access the SMP. For example, your
command requested an operation on a remote object, and you have not been granted
access to the remote object’s system. You can also get this warning if your system
manager has created an ACL for the SMP process name, and the ACL does not grant
you READ or WRITE access authority to the SMP process.
Effect. The command is not executed.
Recovery. Ask your system manager to grant you the authority you need to access
th
e SMP.
Cause. The command failed because the SMP has already been opened by the
maximum number of SAFECOM processes it allows. (T
oo many people are using
SAFECOM at the same time.)
Effect. The command is not executed.
* ERROR * CANNOT OPEN $ZSMP : FILE ERROR = ###
* ERROR * CANNOT OPEN $ZSMP : NO SUCH PROCESS
* ERROR * CANNOT OPEN $ZSMP : SECURITY VIOLATION
* ERROR * CANNOT OPEN $ZSMP: $smp-nam
e IN USE