SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Reference Manual for G-Series RVUs—520413-004
xi
About This Manual
This manual describes the operation of the Subsystem Control Facility (SCF) on HP
NonStop S-series servers and how it is used to configure, control, and inquire about
supported subsystems.
SCF is the online configuration and management facility for G-series RVUs. SCF
enables you to configure and reconfigure devices, processes, and some system
variables without having to take your NonStop S-series server offline. SCF is an
integral part of a 24-hour-a-day, 7-day-a-week operational environment.
Who Should Use This Manual
This manual is written for anyone who is responsible for:
•
Configuring new systems
•
Changing or adding to existing system configurations
•
Planning changes to systems
•
Monitoring the status of objects on the system
•
Operating a network of distributed systems
What’s in This Manual
Section Title Content (page1of2)
1
Using SCF to
Configure and
Manage NonStop
S-Series Servers
Gives an overview of NonStop S-series server
configuration architecture and describes how to handle
configuration files on G-series RVUs.
2
Using SCF to Display
Your System’s
Configuration
Gives commands and example displays of information
about objects configured on your system.
3
Introduction to SCF Gives an overview of SCF, describing its features and
objects, and the general format of commands.
4
Using SCF Describes how to start and stop an SCF session, how
to enter commands, how to change input and output
files, and how to access the SCF online help facility.
5
SCF Commands Describes the syntax and action of all SCF commands.