SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-004
5-40
CLEAR Command
CLEAR Command
The CLEAR command clears the following:
•
Alias names assigned by the ALIAS command
•
Logical-file assignments made by the ASSIGN command
•
Parameters set by the PARAM command
ALIAS alias-name
deletes alias-name. See ALIAS Command on page 5-23.
ASSIGN logical-file
deletes logical-file. See ASSIGN Command on page 5-32.
PARAM param-name
deletes param-name. See PARAM Command on page 5-90.
ALL ALIAS
deletes all aliases assigned by the ALIAS command.
ALL [ PARAM | ASSIGN ]
deletes all logical-file assignments and parameters, as well as all ASSIGN
messages and parameters passed to SCF by TACL. Note that aliases are not
cleared unless you specify ALL ALIAS.
ASSIGN
deletes all ASSIGN messages defined by the ASSIGN command, as well as all
assign messages passed to SCF by TACL.
PARAM
deletes all parameters set by the PARAM command, as well as all parameters
passed to SCF by TACL.
Consideration
The CLEAR command does not affect TACL parameter values and ASSIGN messages
entered after you have exited from SCF.
CLEAR [ ALIAS alias-name ]
[ ASSIGN logical-file ]
[ PARAM param-name ]
[ ALL ALIAS ]
[ ALL [ PARAM | ASSIGN ] ]