SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-004
5-54
DETAIL ERROR
DETAIL ERROR
DETAIL ERROR enables or disables the display of both a full error description and a
suggested recovery action whenever an error is detected.
ON
causes the display of detailed error information.
OFF
disables the display of detailed error information.
DETAIL ERROR Example
The following two commands result in the display of detailed error information:
DETAIL ERROR [ ON | OFF ]
-> DETAIL ERROR ON
-> OBEY SCPEVT
SCF W20112 Maximum number of allowable errors exceeded
Probable Cause
This message informs the user that processing has been
terminated because the maximum number of errors set by
the ALLOW command has been exceeded.
Recommended Action
Either correct the conditions that caused the errors or
increase the number of allowable errors using the ALLOW
command.