SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-004
5-60
ENV Command
ENV Command
The ENV (environment) command displays the SCF startup banner and the current
settings of the environmental parameters for this SCF session.
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file. The variable file-spec is defined on page 5-9.
Consideration
These parameters are displayed by the SCF commands listed, except that the In
attribute is set by the command to run SCF.
Example
The following display is an example of output from the SCF ENV command for a
system named \A.
ENV [ /OUT file-spec/ ]
-> ENV
SCF - T9082F40 - (29FEB96) (01JAN96) - 10/24/96 15:08:48
System \A
Copyright Tandem Computers Incorporated 1986 - 1996
Allow................ NO ERRORS
Allow................ ALL WARNINGS
Assumed Object Name.. $SYSTEM-M
Assumed Object Type.. DISK
Assumed Subsystem.... STORAGE
Confirm.............. OFF
Detail Cmdbuffer..... OFF
Detail Error......... OFF
Detail Logtime....... NONE
Detail Rspbuffer..... OFF
Log.................. \A.$DATA.AUDIT.OCT13
In................... \A.$MIOP.#CLCI
Out.................. \A.$MIOP.#CLCI
Pagesize............. 60 PRINTER
Pagesize............. -1 TERMINAL
Setmanager........... $SCCP1
System............... \A
Timeout.............. 0:01:30.00
Volume............... $SYSTEM.SYSTEM