SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Commands

SCF Reference Manual for G-Series RVUs—520413-004

5-71

LISTDEV Command

The LISTDEV command displays configured information about all processes that have

a device type and that are known to SCF, in the order in which they were configured

and as recorded in the destination control table.

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file. The variable file-spec is defined on page 5-9.

$device

is the device name or device-name template of the devices for which information is

to be displayed. The variable $device is defined on page 5-2.

subsystem

is the name of the subsystem for which a list of logical devices is desired.

Subsystem names are listed in Table 5-1 on page 5-10.

TYPE type [ , subtype ]

causes all logical devices of the given device type (and subtype, if specified) to be

included in the list. Supported subsystems are listed on Table 5-1 on page 5-10.

Specifying any negative value (for example, -1) in subtype results in a list of all

devices of the value specified in type.

The format of the LISTDEV display follows.

LISTDEV [ /OUT file-spec/ ] [ $device ]

[ subsystem ]

[ TYPE type [ , subtype ] ]

LDev Name PPID BPID Type RSize Pri Program

nnn $process nn,nnn nn,nnn nn,nn nnnnn nnn \sys.$vol.subv.fn

LDev The logical-device number.

Name The logical-device name.

PPID The primary processor number and PIN of the specified device.

BPID The backup processor number and PIN of the specified device

Type The device type and subtype.