SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Commands

SCF Reference Manual for G-Series RVUs—520413-004

5-82

NAMES Command

The NAMES command returns a list of the object names and types subordinate to the

specified object.

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file. The variable file-spec is defined on page 5-9.

object-spec

designates the device names to be displayed. The variable object-spec is

defined on page 5-2. If object-spec is omitted, the subordinate object names

and types of the assumed object are displayed (See ASSUME Command on

page 5-36.)

SUB [ subobjtype ]

selects the subordinate objects the command affects. The variable subobjtype

can be a subordinate object type or one of the keywords ONLY, ALL, or NONE, as

explained under SCF Subdevices on page 3-5c.

SEL [ NOT ] state

directs the command only at objects in the specified state or only at those not in

the specified state. Valid states are listed in Table 3-1 on page 3-7. The use of this

option is subsystem-specific.

The format of the NAMES display is shown below.

NAMES [ /OUT file-spec/ ] [ object-spec ]

[ , SUB [ subobjtype ] ] [ , SEL [ NOT ] state ]

subsystem Names object-type object-name

subobjecttype

subobject-name subobject-name subobject-name subobject-name

subsystem The reporting subsystem name.

object-type The object type of the first-level object.