SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Commands

SCF Reference Manual for G-Series RVUs—520413-004

5-118

SUSPEND Command

The SUSPEND command restricts the use of the connections both to and from an

object. Application requests, except close requests, are rejected. The SUSPEND

command can be issued only to an object in the STARTED state. Following execution

of a SUSPEND command, the object state is changed to SUSPENDED.

This is a sensitive command.

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file. The variable file-spec is defined on page 5-9.

object-spec

is the object to be suspended. The variable object-spec is defined on page 5-2.

If object-spec is omitted, the assumed object is suspended. (See ASSUME

Command on page 5-36.) The objects that can be suspended depends on the

subsystem.

SUB [ subobjtype ]

selects the subordinate objects the command affects. The variable subobjtype

can be a subordinate object type or one of the keywords ONLY, ALL, or NONE, as

explained under SCF Subdevices on page 3-5.

Consideration

To cause the object to resume operation, use the ACTIVATE command (described on

page 5-19

Example

The following command restricts the use of connections to and from an Expand LINE

object named $EXPLH:

-> SUSPEND LINE $EXPLH

SUSPEND [ / OUT file-spec / ] [ object-spec ]

[ , SUB [ subobjtype ] ]