SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-004
5-124
TIMEOUT Command
•
Either of the following commands sets an infinite timeout value:
-> TIMEOUT
-> TIMEOUT -1
•
The following TIMEOUT command specifies a timeout value of 5 minutes to allow
time for the following ABORT command to abort all generic processes whose
names begin with $ZZKRN.#TEMP and report results on multiple processes:
-> TIMEOUT 5:00
-> ABORT PROCESS $ZZKRN.#TEMP*