SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-004
B-15
SCF Error Messages
20064
Cause. The home terminal specified in the RUN command is not a legal terminal.
Effect. SCF waits for the next command.
Recovery. Retry the command, specifying a valid terminal name.
20065
Cause. The default SCP process name cannot be opened.
Effect. SCF tries to start its own SCP process, $ZNET.
Recovery. If SCF is able to start $ZNET, then no corrective action is needed. If SCF
is unable to do this, it issues another message.
20069
Cause. The combination of parameters to the HELP command is invalid. Either the
subsystem does not support the command, or the object type is not applicable to the
command.
Effect. SCF waits for the next command.
Recovery. Check the validity of the parameters in your HELP command, correct them
(if necessary), and try again.
20080
Cause. In menu-mode help, you selected the subsystem and an object type. Object
types are supported by the subsystem, but not by SCF itself.
Effect. SCF waits for the next command.
Recovery. Select a subsystem.
SCF 20064 NEWPROCESS error 15: Illegal home terminal
(Guardian error err-num).
SCF 20065 SCP name unavailable. Starting name from file
file-name.
SCF 20069 Invalid help command combination specified.
SCF 20080 SCF subsystem has no object type.