SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-004
B-20
SCF Error Messages
20098
Cause. The modifier in question conflicts with one or more of the command modifiers
on the command line.
Effect. SCF waits for the next command.
Recovery. Delete the command modifier. Refer to the command descriptions in this
manual for information about which modifiers can be combined within a command
string.
20099
Cause. There has been some failure in retrieving information about the named
DEFINE.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the DEFINE error. Then retry the command.
20100
Cause. Duplicates cannot be specified in this list.
Effect. SCF waits for the next command.
Recovery. Remove the duplicate from the number list and retry the command.
20101
Cause. The timeout for all SCF output must not be less than one second or all output
from SCF may fail, including error messages.
Effect. SCF waits for the next command.
Recovery. Retry the command, specifying a larger timeout interval.
SCF 20098 Invalid TRACE command modifier combination.
SCF 20099 Define processing error err-num on DEFINEINFO of
define-name.
SCF 20100 Duplicate number in list.
SCF 20101 Timeout value must not be less than 1 second.
Terminal I/O may fail.