SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-004
B-28
SCF Error Messages
20207
Cause. A file-system error occurred that is outside the normal range for file-system
errors.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
20208
Cause. The system is known to exist locally but currently is not accessible. The
system is either down, or all Expand lines to that system are down.
Effect. SCF waits for the next command.
Recovery. Notify your system manager to restore the connection between your
system and system-name.
20209
Cause. The specified unit must be a positive number.
Effect. SCF waits for the next command.
Recovery. Use the FC command to change the number to a positive value.
20210
Cause. The SETPROMPT command with REVERSE or DIM options is specified for a
terminal other than a 6530 or a 6520.
Effect. SCF waits for the next command.
Recovery. Use the FC command to remove the REVERSE or DIM option. Then retry
the command.
SCF 20207 Unknown file system error n on proccall of
file-name.
SCF 20208 All paths are down to system system-name.
SCF 20209 The unit n must be positive.
SCF 20210 Invalid terminal type for REVERSE and/or DIM
options.