SCF Reference Manual for G-Series RVUs (G06.24+)

Using SCF to Configure and Manage NonStop
S-Series Servers
SCF Reference Manual for G-Series RVUs—520413-004
1-10
Understanding the Naming Conventions in the
SCF0000 File
•
The generic processes configured by the SCF0000 file in the CONFBASE file
should not be renamed. For example:
$ZZKRN.#CEV-SERVER-MANAGER-P0 $ZZKRN.#CEV-SERVER-MANAGER-P1
$ZZKRN.#CLCI-TACL $ZZKRN.#MSGMON
$ZZKRN.#NFS-QIO $ZZKRN.#QIOMON
$ZZKRN.#ROUTING-DIST $ZZKRN.#SCP
$ZZKRN.#SWAN1-SNMP $ZZKRN.#TFDS
$ZZKRN.#TSM-SNMP $ZZKRN.#SP-EVENT
$ZZKRN.#TSM-SRM $ZZKRN.#ZLOG
$ZZKRN.#ZTCP0 $ZZKRN.#ZTCP1
$ZZKRN.#ZEXP $ZZKRN.#ZHOME
$ZZKRN.#ZZFOX $ZZKRN.#ZZKRN
$ZZKRN.#ZZLAN $ZZKRN.#ZZSCL
$ZZKRN.#ZZSMN $ZZKRN.#ZZSTO
$ZZKRN.#ZZWAN $ZZKRN.#OSM-APPSRVR
$ZZKRN.#OSM-CIMOM $ZZKRN.#OSM-OEV
To display these generic processes names:
-> SCF NAMES $ZZKRN
Understanding the Naming Conventions in the SCF0000 File
The SCF0000 file-naming conventions for many SCF objects (except for those objects
that cannot be renamed, as listed previously) are listed in Table 1-3 as well as in the
file $SYSTEM.ZSYSCONF.SCF0000.
Table 1-3. Naming Conventions for SCF Objects
Type of
Object Convention Example Description
Disk drives $Dcabid slot $D3117 First I/O enclosure attached to
third processor enclosure, slot 17
Tape drives $Tcabid slot $T0150 First I/O enclosure attached to
first processor enclosure, slot 50
LAN
adapters
Ecabid slot E3153 First I/O enclosure attached to
third processor enclosure, slot 53
LIFs Lcabid portid L31A First I/O enclosure attached to
third processor enclosure,
slot 53-port 2
TCP
processes
$ZBcabid portid $ZB31A TCP process for the above LIF
Telnet
processes
$ZNcabid portid $ZN31A Telnet process for the above TCP
Listner
processes
$ZPcabid portid $ZP31A Listner process for the above
TCP
SWAN
adapters
Sadapter S19 Nineteenth SWAN adapter