SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-004
B-57
Common Error Messages
-00830
Cause. A TRACE collector NEWPROCESS error has occurred. The NEWPROCESS
error value is given in number,number.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00831
Cause. The TRACE work area cannot be locked.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00834
Cause. A TRACE segment cannot be allocated.
Effect. SCF waits for the next command.
Recovery. Stop and restart SCP, explicitly specifying swap space on a volume with
more space. Then retry the request.
-00835
Cause. A TRACE segment is not available.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
subsystem {E|W}-00830 Trace collector NEWPROCESS error:
number,number for object-name.
subsystem {E|W}-00831 Unable to lock trace work area for
object-name.
subsystem {E|W}-00834 Unable to allocate the trace segment
for object-name.
subsystem {E|W}-00835 Trace segment is inaccessible.