SCF Reference Manual for G-Series RVUs (G06.24+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-004
B-66
Common Error Messages
-00995
Cause. The subsystem’s manager process cannot be accessed; an invalid server
name has been specified in the MANAGER or OBJNAME token.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00996
Cause. The subsystem server responded negatively to SCP’s initial GETVERSION
command.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00997
Cause. The associated tokens returned by the subsystem in response to the
Subsystem Control Point’s (SCP’s) initial GETVERSION command are invalid.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00998
Cause. The server version is not valid.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
subsystem {E|W}-00995 Internal Error: invalid name specified
in MANAGER or OBJNAME token.
subsystem {E|W}-00996 Internal Error: SPI return code return-
code-value received on initial GETVERSION to object-name.
subsystem {E|W}-00997 Internal Error: Subsystem responded
incorrectly to open protocol.
subsystem {E|W}-00998 Internal Error: Server version could
not be obtained from subsystem.