SCF Reference Manual for G-Series RVUs (G06.24+)

D-Series and G-Series Comparison and Migration
SCF Reference Manual for G-Series RVUs—520413-004
C-8
COUP-to-SCF Conversion Guide
COUP Object Type Conversion
As shown in Table C-5, few COUP object types have an equivalent SCF object type.
Although most COUP commands have a direct SCF equivalent (as shown in Table C-6
on page C-8), the method of configuration on G-series systems is very different from
that on D-series systems. Refer to the SCF reference manuals listed on page xii.
COUP Command Conversion
Table C-6 lists each COUP command and its equivalent SCF command. The following
manuals contain further configuration information:
Table C-5. Comparison of COUP and SCF Object Types
COUP Object Type Subsystem SCF Object Type
ALLPROCESSORS Kernel SUBSYS
CONTROLLER no equivalent
DEVICE Only the following have equivalents on this RVU:
Storage DISK
TAPE
WAN DEVICE
MF_CONTROLLER no equivalent
PATH no equivalent
PROCESS Kernel PROCESS
PROCESSOR no equivalent
Subsystem Manual
Kernel SCF Reference Manual for the Kernel Subsystem
Storage SCF Reference Manual for the Storage Subsystem
WAN WAN Subsystem Configuration and Management Manual
Table C-6. Comparison of COUP and SCF Commands (page1of2)
COUP Command SCF Command
ADD DEVICE, LIKE ADD object-spec, LIKE
ALTER ALTER
ASSUME ASSUME
CONFIG
no longer needed
DELAY DELAY
DELETE DELETE
ENV ENV