SCF Reference Manual for G-Series RVUs (G06.24+)

Contents
SCF Reference Manual for G-Series RVUs—520413-004
ii
2. Using SCF to Display Your System’s
Configuration
Running SCF in a Network 1-14
Running SCP at a High PIN 1-14
Controlling D-Series Objects From a System Running G-Series 1-16
Controlling G-Series Objects From a System Running D-Series 1-17
SCF Configurable Objects on Systems Running G-Series 1-19
Protocols 1-19
Devices 1-19
Processes 1-19
2. Using SCF to Display Your System’s Configuration
Example SCF Commands for a Sample System 2-4
Listing the Devices in a System 2-4
TCPIP Subsystem Information 2-6
Kernel Subsystem Information 2-7
Storage Subsystem Information 2-9
SLSA Subsystem Information 2-15
WAN Subsystem Information 2-18
Additional TCP/IP Subsystems 2-21
3. Introduction to SCF
Subsystem Control Facility Architecture 3-1
Subsystem Control Point (SCP) 3-2
SCF Function Overview 3-3
How SCF Works 3-4
SCF Objects 3-5
SCF Subdevices 3-5
General SCF Command Format 3-6
Commands Without an Object Type or Object Name 3-6
Commands With an Object Type and Object Name 3-6
Commands With a SUB or SEL Parameter 3-7
SCF Object States 3-7
4. Using SCF
Running SCF 4-2
Ending an SCF Session 4-4
Completion Codes 4-5
Modes of Operation 4-5
Input Sources 4-7
Setting the Initial Input Source 4-7
Changing the Input Source 4-8