SCF Reference Manual for G-Series RVUs (G06.24+)

Using SCF to Display Your System’s Configuration
SCF Reference Manual for G-Series RVUs—520413-004
2-14
Storage Subsystem Information
Example 20
INFO TAPE $TAPE0, DETAIL ==Detailed information about
== one tape drive
STORAGE - Detailed Info TAPE configuration \SUN.$TAPE0
Adapter Name.......................... $ZZSTO.#PMF.GRP-2.MOD-1.SLOT-55
*Adapter Location (Group,Module,Slot).. (2,1,55)
*BackupCpu............................. 3
*Compression........................... ON
*Density............................... 6250
*DeviceID.............................. 5
*HighPin............................... ON
*MaxOpens.............................. 4
*PrimaryCpu............................ 2
*Program............................... $SYSTEM.SYSTEM.OTPPROCP
*RecSize............................... 2048
SAC Name.............................. $ZZSTO.#PMF.SAC-3.GRP-2.MOD-1.SLOT-55
*StartState............................ STARTED
Example 21
INFO POOL $* ==Lists information about configured storage pools
STORAGE - Info POOL \SUN.$POOL1
*Audited CatalogLocation *Magnetic *Mirrored *Updatestats
ALLOWED $VIRCFG.POOL1CAT REQUIRED REQUIRED 1
STORAGE - Info POOL \SUN.$POOL2
*Audited CatalogLocation *Magnetic *Mirrored *Updatestats
ALLOWED $VIRCFG.POOL2CAT REQUIRED REQUIRED 1
STORAGE - Info POOL \SUN.$POOL3
*Audited CatalogLocation *Magnetic *Mirrored *Updatestats
ALLOWED $VIRCFG.POOL3CAT REQUIRED REQUIRED 1
Example 22
INFO POOL $POOL6, DETAIL ==Detailed information about
== one storage pool
STORAGE - Detailed Info POOL \SUN.$POOL6
*Audited............................... ALLOWED
*BackupCPU............................. 8
CatalogLocation....................... $VIRCFG.POOL6CAT
*DiskInterval.......................... 2%
*DiskThreshold......................... 90%
*ExtentInterval........................-1
*ExtentThreshold.......................-1
*HighPIN............................... OFF
*Magnetic.............................. REQUIRED
*Mirrored.............................. REQUIRED
*Mode.................................. QUIET
Monitor............................... $ZSMS
*PrimaryCPU............................ 9
*Program............................... $SYSTEM.SYSTEM.OPP
*StartState............................ STARTED
*UpdateStats........................... 1
Configuration State................... Fully Defined
Physical Volumes:
$P6D04 $P6D03 $P6D02 $P6D01