SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-005
5-5
Effect of the ASSUME Command on Object-Name
Specification
except that gpname must be preceded by a pound symbol (#) and cannot be
enclosed in quotation marks.
Refer to the SCF Reference Manual for the Kernel Subsystem for more
information about generic processes.
Reserved Names
The following names are reserved names and must not be used as logical device or
process names during system configuration:
In this list, nn is any two-digit decimal number, and aaa is any combination of one, two,
or three letters or decimal numbers.
Effect of the ASSUME Command on Object-Name Specification
If an ASSUME command has been used to establish a default object type and fully
qualified object name, and if the object type and object name together refer to a valid
object, you can omit object-spec from a command. In this case, the command is
applied to the object known as the assumed object, the object designated using the
ASSUME command (described on page 5-36). The form of the object name depends
on the type of object. Usually, the name has the form of an operating-system device
name, subdevice name, or process name. Some examples follow:
•
All or part of the object name can be omitted if an ASSUME command has been
used to establish an appropriate object name. For example, if the command
-> ASSUME WS $L1.#TERM1
has been entered, subsequent entry of the INFO command by itself displays
information about the workstation called $L1.#TERM1.
•
Many SCF commands accept a list of object names in place of a single object
name. If so, object names must appear within a pair of parentheses and must be
separated by commas. The command is then applied to all the objects in the list.
For example, the command:
-> ASSUME $L1; INFO WS (#WS1, #WS2)
displays information about the $L1.#WS1 and $L1.#WS2 workstations.
•
Some subsystems are structured hierarchically, with a group of objects of one type
logically subordinate to an object of another type. For example, a number of
$AOPR $IPB $OSP $SYSTEM $TSCH
$C9341 $KEYS $PM $T $Xaaa
$CMON $MLOCK $S $TICS $Yaaa
$CMP $MLOK $SPLS $TMP $Zaaa
$DMnn $NCP $SPLP $TRPM $0
$IMON $NULL $SSCP $TRMS