SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-005
5-18
ABORT Command
Examples
•
The following command causes line $L3 to be aborted. Objects subordinate to that
line are stopped; they are not deleted.
-> ABORT LINE $L3, SUB ALL
•
The following command causes line $L3 to be aborted and stops all objects
subordinate to it:
-> ABORT LINE $L3, SUB
•
The following command causes workstation $L3.#WS1 to be aborted and stops all
objects subordinate to it:
-> ABORT WS $L3.#WS1, SUB
•
The following command causes all windows configured under workstation #WS1
on $L3 to be aborted:
-> ABORT WINDOW $L3.#WS1, SUB ONLY
•
The following command causes window $L3.#WIND1 to be aborted:
-> ABORT WINDOW $L3.#WIND1
•
The following command causes all windows on $L3 to be aborted:
-> ABORT WINDOW $L3.*
•
The following command causes the generic process #TEMP to be aborted:
-> ABORT PROCESS $ZZKRN.#TEMP
•
The following command causes all drives to the $DATA3 disk to be aborted:
-> ABORT DISK $DATA03