SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-005
5-63
HELP Command
..STATUS LINE $LHX1
.. press Return, causing the command to be executed
For more information on the use of the FC command, refer to the Guardian User’s
Guide.
HELP Command
The HELP command displays the syntax and meaning of SCF commands. See also
Using the F16 HELP Key on page 4-12 and Using the SCF HELP Command on
page 4-21.
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file. The variable file-spec is defined on page 5-9.
ALL
displays general information about the SCF HELP command. This information
includes a list of commands supported by SCF, a list of subsystems supported by
SCF, and a description of how to use the HELP command.
COUP [ command ]
displays general information about how to convert COUP commands to SCF
commands. If you enter HELP COUP without command, SCF displays a list of the
relevant SCF commands, a list of supported objects, and a list of COUP
commands followed by a brief description of each replacement SCF command. If
you enter COUP with command, SCF displays a brief description of the
replacement SCF command.
PUP [ command
displays general information about how to convert PUP commands to SCF
commands. If you enter HELP PUP without command, SCF displays a list of the
relevant SCF commands, a list of supported objects, and a list of PUP commands
HELP [ /OUT file-spec/ ]
[ ALL ]
[ COUP [ command ] ]
[ PUP [ command ] ]
[ basic-component ]
[ subsystem ]
[ subsystem error-number ]
[ command ]
[ object-type ]
[ object-name ]
[ object-state ]
[ subsystem [ command ] [ object-type ] ]