SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Commands
SCF Reference Manual for G-Series RVUs—520413-005
5-67
INFO Command
INFO Command
The INFO command displays the current or default attribute values for the specified
objects.
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file. The variable file-spec is defined on page 5-9.
object-spec
designates the objects whose attribute values are to be displayed. The variable
object-spec is defined on page 5-2. You can omit object-spec if it has been
assumed. (See ASSUME Command on page 5-36.) The objects to which this
command can be applied depend on the subsystem.
DETAIL
causes detailed information to be displayed. If omitted, only one line of information
is displayed for each object. The use of this parameter is subsystem-specific.
SUB [ subobjtype ]
selects the subordinate objects the command affects. The variable subobjtype
can be a subordinate object type or one of the keywords ONLY, ALL, or NONE, as
explained under SCF Subdevices on page 3-5.
SEL [ NOT ] state
directs the command only at objects in the specified state or only at those not in
the specified state. Valid states are listed in Table 3-1 on page 3-7. The use of this
parameter is subsystem-specific.
DEFAULT
causes the default values of the attributes to be displayed.
attribute-name
causes the values of only the specified attributes to be displayed. (See SCF
Object Attributes and Their Values on page 5-7.)
INFO [ /OUT file-spec/ ] [ object-spec ] [ , DETAIL ]
[ , SUB [ subobjtype ] ] [ , SEL [ NOT ] state ]
[ , DEFAULT ] [ , attribute-name ]… [ OBEYFORM ]