SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Commands

SCF Reference Manual for G-Series RVUs—520413-005

5-107

SETPROMPT Command

The SETPROMPT command allows you to choose the form of the SCF prompt.

This is a nonsensitive command.

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file. The variable file-spec is defined on page 5-9.

disables the specified prompt-option.

prompt-option

is one of the following:

ALL

enables all prompt-option values.

NONE

disables all prompt-option values. All prompt-option values are returned to

their default values.

Consideration

The REVERSE and DIM options can be used only on a 6530 or 6520 terminal or a

device operating as a 6530 emulator.

SETPROMPT [ /OUT file-spec/ ]

{ [ NO ] prompt-option [ , [ NO ] prompt-option ]… }

{ ALL [ , [ NO ] prompt-option ]… }

{ NONE [ , prompt-option ]… }

DIM Displays the prompt in dim video.

MANAGER Displays the manager name, if one was set by the

SETMANAGER command.

NUMBER Displays the command-line number. This is the default.

OBJECT Displays the assumed object type and object name (see

ASSUME Command on page 5-36).

REVERSE Displays the prompt in reverse video.

SYSTEM Displays the current system name.

VOLUME Displays the default volume and subvolume names.