SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Commands

SCF Reference Manual for G-Series RVUs—520413-005

5-111

STATS Command

The STATS command displays statistical information for the specified object.

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file. The variable file-spec is defined on page 5-9.

object-spec

designates the objects whose statistical information is to be displayed. The

variable object-spec is defined on page 5-2. If object-spec is omitted, the

statistics for the assumed object are displayed. (See ASSUME Command on

page 5-36.)

RESET

if present, restores all the statistics counters to their initial values after the statistics

are displayed.

RESET is a sensitive option.

SUB [ subobjtype ]

selects the subordinate objects the command affects. The variable subobjtype

can be a subordinate object type or one of the keywords ONLY, ALL, or NONE, as

explained under SCF Subdevices on page 3-5.

SEL [ NOT ] state

directs the command only at objects in the specified state or only at those not in

the specified state. Valid states are listed in Table 3-1 on page 3-7. The use of this

option is subsystem-specific.

STATS [ /OUT file-spec/ ] [ object-spec ] [ , RESET ]

[ , SUB [ subobjtype ] ] [ , SEL [ NOT ] state ]