SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-005
B-9
SCF Error Messages
20006
Cause. The specified command cannot function properly unless the SCF input file is a
terminal.
Effect. SCF waits for the next command.
Recovery. Remove the command from the command file, or do not use the command
while communicating with SCF through a process.
20007
Cause. The specified value is out of range.
Effect. SCF waits for the next command.
Recovery. Specify a value within the specified range.
20025
Cause. An attempt to open the file name $RECEIVE is unsuccessful.
Effect. SCF waits for the next command.
Recovery. Stop and restart SCF. If the problem persists, contact your service
provider, as described under If You Have to Call Your Service Provider on page B-2.
20032
Cause. An invalid case value has been generated with no associated case label.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
SCF 20006 This command is only valid with a terminal for an
infile.
SCF 20007 name value must be from lower-bound to upper-bound.
SCF 20025 Open of $RECEIVE failed.
SCF 20032 INTERNAL ERROR: Case value out of range.