SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-005
B-13
SCF Error Messages
20056
Cause. The ZsubsysSCF product module file has an invalid format.
Effect. SCF waits for the next command.
Recovery. If the ZsubsysSCF product module resides on $SYSTEM.SYSTEM or
$SYSTEM.SYSnn, contact your service provider, as described under If You Have to
Call Your Service Provider on page B-2. If you have used the PARAM SCF^PM^LOC
command to point to the product module, consult the author of the product module with
undefined externals.
20057
Cause. The ZsubsysSCF product module must be licensed before it can be run.
Effect. SCF waits for the next command.
Recovery. Use FUP LICENSE to license the product module. FUP LICENSE is
described in the File Utility Program (FUP) Reference Manual.
20058
Cause. A file-system error occurred.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error.
20059
Cause. The version of the library file does not match the version of the ZsubsysSCF
product module.
Effect. SCF waits for the next command.
Recovery. Use versions that match. If you can’t determine this, contact your service
provider, as described under If You Have to Call Your Service Provider on page B-2.
SCF 20056 NEWPROCESS error 6: File format error on file-name.
SCF 20057 NEWPROCESS error 7: Unlicensed privileged program.
SCF 20058 NEWPROCESS error 8: Process name error (Guardian
error err-num).
SCF 20059 NEWPROCESS error 9: Library conflict.