SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-005
B-23
SCF Error Messages
20116
Cause. The home terminal is unavailable, possibly due to a STOPOPENS command.
Effect. SCF waits for the next command.
Recovery. If the home terminal was specified in the RUN SCF command, then specify
a different home terminal. Otherwise, use the %WT field of a TACL STATUS command
on the home terminal to see why it is not available. STATUS command fields are
described under the PROCESSINFO procedure call in the Guardian Procedure Calls
Reference Manual.
20117
Cause. The specified DEFINEs cannot be processed.
Effect. SCF waits for the next command.
Recovery. Check all DEFINEs in effect for one that has been incorrectly entered.
Refer to SCF Support for DEFINE Statements on page 4-20 and clear any DEFINEs
that are not necessary for this SCF session.
20118
Cause. A specified device is of the wrong type.
Effect. SCF waits for the next command.
Recovery. Consult documentation on the program you are trying to run to determine
which devices are legal.
20119
Cause. The program and library files are identical.
Effect. SCF waits for the next command.
Recovery. Retry the command with the correct library name.
SCF 20116 NEWPROCESS error 16: I/O error on home terminal.
SCF 20117 NEWPROCESS error 17: DEFINE context error.
SCF 20118 NEWPROCESS error 18: Process/device subtype is
illegal.
SCF 20119 NEWPROCESS error 19: Process/device subtype is not
the same as its existing sibling.