SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-005
B-26
SCF Error Messages
20132
Cause. Because of file-system error error-num, SCF is unable to access or read the
$SYSTEM.ZSYSCONF.CONFIG file.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error. Then retry the command.
20133
Cause. Because of file-system error error-num, SCF is unable to create, open, or
write to the $SYSTEM.ZSYSCONF.CONFxxyy file.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error. Then retry the command.
20134
Cause. Because of file-system error err-num, SCF is unable to convert the system
number to its corresponding system name.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error. Then retry the command.
20200
Cause. No SCF devices match the specified wild-card name.
Effect. SCF waits for the next command.
Recovery. Informational message only; no corrective action is needed.
SCF 20132 Guardian error err-num on system configuration
file.
SCF 20133 Guardian error err-num on backup configuration
file.
SCF 20134 Guardian error err-num, converting system number to
system name.
SCF 20200 wild-card-name did not expand to any SCF supported
device names.