SCF Reference Manual for G-Series RVUs (G06.27+)

Using SCF to Configure and Manage NonStop
S-Series Servers
SCF Reference Manual for G-Series RVUs—520413-005
1-9
How to Adapt the Initial CONFIG File to Your System
configuration database. To do this, create an SCF command file containing commands
like the following:
Then invoke the command file. For example:
> SCF / IN GPADD /
For more information about generic processes, refer to the SCF Reference Manual for
the Kernel Subsystem.
How to Customize the Default Configuration for Your System
To customize the default configuration for your system, you create command files to
configure and start objects that are not part of the standard configuration supplied by
HP:
•
Use the SCF manuals listed on page xii for the correct SCF commands.
•
Copy the STARTCOM and STARTSCF files on the $SYSTEM.ZSYSCONF
subvolume and make changes to these copies to create your own command files.
With a few exceptions, SCF objects in the SCF0000 file follow naming conventions that
suggest their physical location in the enclosure. After you have verified that your
system is in working order, you can rename most SCF objects. The exceptions are:
•
The $SYSTEM, $DSMSCM, and $AUDIT disks must not be renamed.
•
The following processes and devices used by TSM must not be renamed:
MIOE0 LANY $ZTCP0 $ZTNP1
MIOE1 $ZCVP0 $ZTCP1 $ZPRP0
LANX $ZCVP1 $ZTNP0 $ZPRP1
$ZOSM $ZCMOM $ZOEV
==========================================================================
== Expand manager process ==
==========================================================================
ADD PROCESS $ZZKRN.#ZEXP, NAME $ZEXP, PRIORITY 180, AUTORESTART 10, &
PROGRAM $SYSTEM.SYSTEM.OZEXP, PRIMARYCPU 0, BACKUPCPU 1, TYPE OTHER, &
STARTMODE SYSTEM, HOMETERM $ZHOME, OUTFILE $ZHOME, &
STARTUPMSG "<BCKP-CPU>"
ADD PROCESS $ZZKRN.#ZZATM, NAME $ZZATM, PRIORITY 180, AUTORESTART 10, &
PROGRAM $SYSTEM.SYSTEM.ATMASM, PRIMARYCPU 0, BACKUPCPU 1, &
STARTMODE KERNEL, HOMETERM $ZHOME, INFILE,$YMIOP.#CLCI, &
OUTFILE $ZHOME, STARTUPMSG "<BCKP-CPU>"
ADD PROCESS $ZZKRN.#ZZFOX, NAME $ZZFOX, TYPE FOXMON, PRIORITY 199,
PROGRAM $SYSTEM.SYSTEM.FOXMON, PRIMARYCPU 0, BACKUPCPU 1, &
STARTMODE MANUAL, HOMETERM $ZHOME
ADD PROCESS $ZZKRN.#TFDS, NAME $ZDMP, TYPE FOXMON, PRIORITY 199,
PROGRAM $SYSTEM.SYSTEM.TFDS, PRIMARYCPU 0, AUTORESTART 1, &
STARTMODE APPLICATION, STARTUPMSG “1 [“$SYSTEM.SYSTEM.TFDSCONF]”, &
HOMETERM $ZHOME, DEFAULTVOL $SYSTEM.ZTFDS