SCF Reference Manual for G-Series RVUs (G06.27+)

Using SCF to Configure and Manage NonStop
S-Series Servers
SCF Reference Manual for G-Series RVUs—520413-005
1-11
Understanding the Naming Conventions in the
SCF0000 File
cabid
is a two-digit number that identifies the enclosure.
slot
is the actual physical slot number in the enclosure:
m
is the one-digit number that identifies whether the G4SA or FCSA is installed in
module 2 or 3 of an IOAM. A module is either 2 or 3.
LIFs Lcabid portid L31A First I/O enclosure attached to
third processor enclosure,
slot 53-port 2
TCP
processes
$ZBcabid portid $ZB31A TCP process for the above LIF
Telnet
processes
$ZNcabid portid $ZN31A Telnet process for the above TCP
Listner
processes
$ZPcabid portid $ZP31A Listner process for the above
TCP
SWAN
adapters
Sadapter S19 Nineteenth SWAN adapter
A cabid of… …indicates Range of Values
0n The object is in processor
enclosure n.
01-08
n1 The object is in I/O enclosure 1
attached to processor enclosure n.
11, 21, 31, 41, 51,
61, 71, or 81
n2 The object is in I/O enclosure 2
attached to processor enclosure n.
12, 22, 32, 42, 52,
62, 72, or 82
n3 The object is in I/O enclosure 3
attached to processor enclosure n.
13, 23, 33, 43, 53,
63, 73, or 83
Number Description
1-8 or 11-18 A disk drive
50 or 55 A tape drive
51-54 A LAN adapter
Table 1-3. Naming Conventions for SCF Objects (page 2 of 2)
Type of
Object Convention Example Description