SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-005
B-48
Common Error Messages
-00017
Cause. The object specified by the object name cannot be found within the
subsystem. Usually this means that the object has not yet been added. This error
situation includes the case where a command refers explicitly to an object and no
object of that type or subtype is supported by the named subsystem.
Effect. SCF waits for the next command.
Recovery. Add the device, correct the object name, or correct the object type.
-00018
Cause. This object type is not supported. An invalid, unknown, or unsupported object
type has been encountered.
Effect. SCF waits for the next command.
Recovery. Refer to the SCF reference manual for a specific subsystem for information
about the supported object types.
-00019
Cause. An invalid object-name template has been found in the command buffer.
Effect. SCF waits for the next command.
Recovery. Correct the object-name template and retry the command.
-00020
Cause. An unexpected loss of the link between objects has occurred.
Effect. SCF waits for the next command.
Recovery. Recovery is subsystem-specific. Refer to the SCF reference manual for a
specific subsystem for information about how that particular subsystem supports the
command and its associated object types.
subsystem {E|W}-00017 Object object-name Not Found for
device- type num and subdevice-type num.
subsystem {E|W}-00018 Object type is not supported by this
subsystem.
subsystem {E|W}-00019 Invalid object name:object-name.
subsystem {E|W}-00020 Path path-name is inaccessible for
object-name.